Monday, March 31, 2014

D.I.Y. gardening kneeling pad...

I feel like the title for this post ages me about 30 years! But I am truly intent on getting into gardening so I may as well get accessorised appropriately ;)

I've mentioned before that, because we rent, we can't do too much with our current garden, so it is more about maintenance. I can't help but dream about all we would do if we had complete control over it but for now I'll settle for weeding, pruning and adding spring bulbs. When it's chilly, tidying up the garden moves waaaaay down our priority list...so when the wave of warm weather hit this weekend we made the most of it and got outside...but first I made my kneeling pad!


Now I use the term kneeling pad in its loosest way since really I've just made a rectangular cushion...but it works for me and, since I had all the supplies to hand, it cost me absolutely nothing!

Ideally I would make this with a waterproof fabric like oil cloth however I had this blue fabric lying around so I just made a removable cover so that it could easily be washed.

It's so easy and I plan to to use the same method (but with much prettier fabric) to make some indoor cushions!

Just in case you fancied making a kneeling cushion then here's a quick guide to how I made mine...


1. Cut the lining fabric into a 30cm x 90cm strip and fold in half. Sew the sides together, starting 10 cm from the folded edge to leave space to pull the fabric through to the right side. I added a line of zigzag stitch to further strengthen the seam. Trim any excess fabric.

2. Turn the lining cover inside out by pulling it through the hole. And stuff with your filling (I used hollowfibre filling)! Sew the small opening together, I would normally use a slip stitch for this but I was feeling a little lazy so I just machine stitched it closed.


Ignore the seam in the middle of the cushion, I used an old curtain lining which had this seam in it already!

3. To make the outer cover cut the fabric into a strip of approximately 33cm x 110cm. Double hem the short sides (if your fabric allows, otherwise a single hem would be fine).


Now right after my scissors started slicing up the fabric I realised I hadn't added the extra length to allow the fabric to overlap so please ignore the added fabric in the next photo...I went into automatic mode!

4. Lay the fabric out right side facing up and lie the cushion on top. Fold one end of the fabric over the cushion and position so that it is roughly in the middle of the cushion. Fold the other end of the fabric over so that it fits the cushion snugly. Pinch the two ends together as you remove the cushion. I'm sure there are more technical ways to do this but it just saved added measuring out! Pin the sides together.


5. Sew down the two long sides and then turn the right way out. Now it's ready for the cushion!


This took me no time at all...and it really did help my knees! In fact, there is a significant lack of chairs at work so I often end up kneeling when I chat with people...I wonder whether I'd get away with carrying one of these around the hospital for such times?! I could even make one to colour coordinate with my OT green trousers :)

2 comments:

  1. I just love this DIY! I've been gardening more lately and my knees could really use some extra padding. I love that the cover is removable so you can wash it. It is bound to get dirty in the garden!

    ReplyDelete
  2. Nice post. Thanks for the nice information; it is really awesome and very useful for the blogger reader those want to know about the gardening kneeling pad. Thanks to sharing it...

    Kneeling Pad Gardening

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...